hot dipp galvanized steel pipe weight calculation
hot dipp galvanized steel pipe weight calculation
hot dipp galvanized steel pipe weight calculation: (outer diameter - wall thickness) * wall thickness * 0.02466 = weight per meter, multiplied by 1.03-1.06 galvanized layer. Generally multiplied by the galvanized layer coefficient of 1.03 is more accurate, which is the weight per metre of the final galvanized pipe, for example, the diameter is 20, the wall thickness of the city 2.0, as follows (20-2) * 2 * 0.02466 = 0.89 kg, and finally multiplied by plating The zinc layer coefficient of 1.03 is the weight of the galvanized steel pipe per meter.
hot dipp galvanized steel pipe weight calculation
Specifically, you can check the hardware manual yourself and find out. In the reference book "Use Hardware Manual", there is no theoretical weight of galvanized steel pipe, but the book has a note after the theoretical weight table of steel pipe: galvanized steel pipe is 3~6% heavier than non-galvanized steel pipe. Therefore, the theoretical weight of the non-galvanized steel pipe of the corresponding specifications and thickness in the hardware manual can be used. Then increase the professional weight coefficient of 4.5% (3~6% of the intermediate value) to obtain the theoretical weight (kg/m) of the galvanized steel pipe. Different wall thicknesses are also different, generally calculated as 1.03-1.06 of the last galvanized pipe.
hot dipp galvanized steel pipe weight calculation
The approximate weight is as follows
DN200 33.41KG/M
DN250 48.68KG/M
DN300 66.29KG/M